Crushers reduce large rocks into smaller rocks, gravel or rock dust.

Crushers may be used to reduce the size, or change the form, of waste materials so they can be more easily disposed of or recycled, or to reduce the size of a solid mix of raw materials (as in rock ore, so that pieces of different composition can be differentiated.  There are several different types of crushers: Jaw, Cone and Impact.

JAW CRUSHERS

Terex® Finlay tracked mobile jaw crushers are renown for their capabilities in the reduction and sizing of aggregates for construction materials and also recycling construction waste. The Finlay range of jaw crushers are designed to meet the toughest demands of primary crushing applications with their impressive power, reliability and proven performance.

J-960 Jaw Crusher

Engine:
  • Tier 4F / Stage IV: Caterpillar C7.1 140kW (188hp)
Jaw Chamber:
  • Terex 900 x 600mm (35″ x 24″) Single toggle jaw crusher
  • Direct drive via clutch
Hopper:
  • Rigid Fixed Hopper
Main Conveyor:
  • 800mm wide belt fitted with impact bars at feed point- fixed
  • Hydraulic raise/ lower of conveyor
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Hydraulic raise/ lower of conveyor
  • Reverse operation for blockage removal
  • Under Crusher deflector plate
  • Hydraulic folding product conveyor c/w hydraulic raise/lower
  • Radio remote System
  • Stockpile level sensor
  • Jaw Level Sensor
Download the Brochure 

1-800-205-6633 | 604-940-8210

J-1160 Jaw Crusher

Engine:
  • Tier 4F / Stage IV: Caterpillar C7.1 140kW (188hp)
Jaw Chamber:
  •  Terex 1000 x 600mm (40″ x 24″) Single toggle jaw crusher
  • Hydrostatically driven with reverse function
  • Fully hydraulically adjustable closed side setting
Hopper:
  • Grizzly feeder with integral pre-screen, standard 50mm spacing
  • Additional catwalk at inlet chute on RHS of machine, giving access
    to both sides of feeder
  • Hydraulic folding & locking hopper extensions(Option)
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Hydraulic raise/ lower of conveyor
  • Hydraulic deflector plate – fits underneath jaw
  • Belt weigher
  • Hydraulic raise/ lower of main conveyor
  • Radio remote System
  • Single/Twin pole over band magnet, RHS discharge (c/w stainless
    steel skirting & stainless steel discharge chute)
  • Dust Covers
Download the Brochure

1-800-205-6633 | 604-940-8210

J-1170 Jaw Crusher

Engine:
  • Tier 4F/ Stage IV: Scania DC9 257 kW (345 hp)
Jaw Chamber:
  • Terex  1100 x 700mm (44″ x 28″) Single toggle jaw crusher
  • Available in HA or HR chamber
  • Hydrostatically driven with reverse function
  • J1170 Direct Drive option via clutch available
Hopper:
  • Hydraulically folding and locking hopper sides
  • Integrated pan and feeder – cassette is 75mm spacing as
    Standard
  • Available with Pre-Screen option with mesh aperture of your choice
Main Conveyor:
  • 1000mm wide main belt fitted with impact bars at feed point
  • Hydraulic raise/ lower of main conveyor
  • Ripstop belt option
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Hydraulic deflector plate under jaw crusher
  • Belt weigher
  • Radio remote System
  • Extended Hopper Flares
  • Single/Twin pole over band magnet, RHS discharge (c/w stainless steel skirting & stainless steel discharge chute)
Download the Brochure

1-800-205-6633 | 604-940-8210

J-1175 Jaw Crusher

Engine:
  • Tier 4F/ Stage IV: Scania DC9 257 kW (345 hp)
  • Tier 4F/ Diesel-Electric Dual Power option available
Jaw Chamber:
  • Terex 1070 x 762mm (42″ x 30″) Single toggle jaw crusher c/w 
 full hydraulic closed side setting adjustment
  • Hydrostatically driven with reverse function for clearing blockages
Hopper:
  • Hydraulically folding and locking hopper sides
  • Integrated pan and feeder – cassette is 75mm spacing as
    Standard
  • Available with Pre-Screen option with mesh aperture of your choice
Main Conveyor:
  • 1000mm wide main belt fitted with impact bars at feed point
  • Hydraulic raise/ lower of main conveyor
  • Ripstop belt option
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
    • Hydraulic deflector plate under jaw crusher
    • Diesel/Electric option available
    • Belt weigher
    • Radio remote System
    • Extended Hopper Flares
    • Single/Twin pole over band magnet, RHS discharge (c/w stainless steel skirting & stainless steel discharge chute)
Download the Brochure

1-800-205-6633 | 604-940-8210

J-1480 Jaw Crusher

Engine:
  • Tier 4 Final / Stage IV: Scania DC13 331kW (450hp)
Jaw Chamber:
  • Terex 1415mm x 820mm (55″ x 32″) single toggle jaw
    crusher c/w full hydraulic closed side setting adjustment
  • Hydrostatically driven with reverse function
Hopper:
  • Hydraulically folding and locking hopper sides
  • Heavy duty vibrating Pan & independent Pre-screen (75mm
    Standard spacing)
Main Conveyor:
  •  1400mm wide main belt fitted with impact bars at feed point
  • Stockpile level sensor with auto stop function
  • Ripstop belt option
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Hydraulic deflector plate under jaw crusher
  • Diesel/Electric option available
  • Belt weigher
  • Radio remote System
  • Extended Hopper Flares
  • Single/Twin pole over band magnet, RHS discharge (c/w stainless steel skirting & stainless steel discharge chute)
Download the Brochure

1-800-205-6633 | 604-940-8210

CONE CRUSHERS

Terex® Finlay cone crushers are renown for their capabilities in crushing mid-hard and above mid-hard ores and rocks. The Finlay range of cone crushers provide flexibility, high rates of productivity and excellent product shape in secondary and tertiary applications.

C1540 Cone Crusher

Engine:
  • Tier 4 Final / Stage IV: Scania DC09 257kW (350 hp)
  • Tier 4F/ Diesel-Electric Dual Power option available
Cone  Chamber:
  • Terex TC1000 40” Chamber
  • Long throw eccentric, medium coarse concave (max feed
 size 160mm) As standard
  • Direct drive via clutch in short model with no pre-screen
  • Hydrostatic drive available with or without prescreen
Hopper:
  • Fixed hopper c/w wear resistant liner plates
  • 1050mm (42″) wide belt
  • Metal detector & metal contaminants purge system
Main Conveyor:
  • 900mm (36″) wide belt

  • Stockpile level sensor (Option)
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  •  6’x4’ single deck pre-screen for removal of fines
  • Camera over crusher
  • Diesel/Electric option available
  • Available in RS model for closed loop
  • Side conveyor for pre-screen
  • Radio remote system
  • Manual hopper extensions
Download the Brochure

1-800-205-6633 | 604-940-8210

C-1545 Cone Crusher

Engine:
  •  Tier 4 Final / Stage IV :- Scania DC13 331kW (450hp)
Cone Chamber:
  • Terex TC1150 45” chamber
  • Long throw eccentric, medium coarse concave (max feed
    size 180mm) as standard
  • Direct drive via clutch
Hopper:
  • Fixed hopper c/w wear resistant liner plates
  • 1300 mm (51″) wide belt STD
  • Metal dector & metal contaminants purge sytem
Main Conveyor:
  • 1000mm (40″) wide belt
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Camera over Crusher
  • Belt weigher

  • Lighting mast

  • Radio remote system

  • Hydraulic hopper extensions
Download the Brochure

1-800-205-6633 | 604-940-8210

C-1550 Cone Crusher

Engine:
  • Tier 4 Final / Stage IV :- Scania DC13 368kW (500hp)(188hp)
Cone Chamber:
  • Terex TC1300 50” Chamber
  • Long throw eccentric, medium coarse concave (max feed size 180mm) as standard
  • Direct drive via clutch
Hopper:
  • Fixed hopper c/w wear resistant liner plates
  • 1200 mm (47″) wide belt
  • Metal dector & metal contaminants purge sysytem
Main Conveyor:
  • 1200mm (47″) wide belt
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
  • Camera over crusher
  • Belt weigher
  • Lighting mast
  • Radio remote system
  • Hydraulic hopper extensions
Download the Brochure

1-800-205-6633 | 604-940-8210

  • C-1554 Cone Crusher
Engine:
  • Caterpillar C18 ACERT 571kW(765hp)
Cone Chamber:
  • Terex MVP450X 54” cone
  • Long throw eccentric, medium coarse concave (max feed
    size 180mm) As standard
  • Direct drive via clutch
Hopper:
  • Fixed hopper c/w wear resistant liner plates
  • 1200 mm (47″) wide belt STD
  • Metal dector & metal contaminants purge system
Main Conveyor:
  • 1200mm (47″) wide belt
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Options:
    • HydraulicCamera over crusher
    • Stockpile level sensor
    • Belt Weigher
    • Lighting mast
    • Radio remote System
    • Hydraulic hopper extensions
Download the Brochure

1-800-205-6633 | 604-940-8210

IMPACT CRUSHERS

Terex Finlay offer a comprehensive range of Mobile Impact Crushers that excel in quarrying, mining, demolition and recycling applications.The impact crusher range is ideal for shaping applications including making chips, sand, concrete manufacture, and glass recycling. This includes both horizontal and vertical impact crushers.

I-100 Impact Crusher

Engine:
  • Tier 4 Final / Stage IV: CAT C7.1 205Kw (275hp)
Impact Chamber:
  • Terex CR004 Impact chamber c/w full hydraulic apron setting
  • Direct drive via clutch
Hopper:
  • Fixed Hopper c/w vibrating feeder
  • Stepped grizzly feeder with integral pre-screen, standard
 35mm Tines spacing.
Main Conveyor:
  • 900mm (35″) wide full length belt
  • Rigid head section (Transport length 13.5m)
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Optional RS Component:
  • 8′ X 4′ single deck screen
  • Fines conveyor 1200mm belt – hydraulically folding for transport
  • Transfer conveyor 500mm belt – hydraulically folding for 
 transport STD
  • Recirculating Conveyor 500mm belt – hydraulically folding for transport STD
  • Screen, fines & transfer conveyor can be removed as single component STD
Options:
  • Rigid head section (transport length 13.5m)
  • Main conveyor folding head section (transport Length 12.05m)
  • Belt weigher
  • Lighting mast
  • Twin pole heavy duty overband magnet (skirting & chute as above)
  • Radio remote system
  • Undercrusher vibratory feeder c/w shortened main conveyor
Download the Brochure

1-800-205-6633 | 604-940-8210

I-120 Impact Crusher

Engine:
  • Tier 4 Final / Stage IV: Scania DC9 294 kW (400hp)
Impact Chamber:
  • Terex CR038 Impact chamber
  • Fully hydraulically assisted apron setting and hydraulic
    apron release
  • Manual raise chamber flap allowing extra inlet clearance
  • 4 bar rotor – 2 high & 2 Low
  • Direct drive via clutch
  • Drive belt tensioner wheel
  • Blow bar lifting tool supplied
  • Tip Speed range 36-45 m/sec (118-148 ft./sec).
Hopper:
  • VGF fixed hopper
  • Stepped grizzly feeder with integral pre-screen, standard 50mm spacing STD
Main Conveyor:
  • 1100mm (43.3″) belt full length

  • Hydraulic raise/ lower of main conveyor
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Optional RS Component:
  • 3.66m X 1.52m (12’ X 5’) two deck after screen
  • 500mm (20”) wide belt hydraulic folding re-circulating conveyor able to slew for stockpiling oversize material
  • 1400mm (55″) wide belt fines conveyor
  • Rapid detach after screen system for flexibility
Options:
  • Reversible engine fan with fuel save function
  • Belt weigher
  • Lighting mast
  • Twin pole heavy duty overband magnet
  • Radio remote system
  • Undercrusher vibratory feeder c/w shortened main conveyor
Download the Brochure

1-800-205-6633 | 604-940-8210

I-140 Impact Crusher   

Engine:
  • Tier 4F / Stage IV: Caterpillar C7.1 140kW (188hp)
Impact Chamber:
  • Terex CR032 Impact chamber
  • Fully hydraulically assisted apron setting and hydraulic
    apron release
  • Manual raise chamber flap allowing extra inlet clearance
  • 4 bar rotor – 2 high & 2 low
  • Direct drive via clutch
  • Drive belt tensioner wheel
  • Blow bar lifting tool supplied
  • Tip speed range 35-44 m/sec (115-144 ft./sec).
Hopper:
  • VGF Fixed Hopper
  • Stepped grizzly feeder with integral pre-screen, standard 50mm spacing STD
Main Conveyor:
  • 1300mm (51″) Belt full length
  • Hydraulic raise/ lower of main conveyor
T-Link Telemetry System:
  • T-Link Telemetry System fitted c/w 3 years data subscription
Optional RS Component:
  • 4.88m X 1.52m (16’ X 5’) two deck after screen
  • 500mm (20”) wide belt transfer conveyor
  • 500mm (20″) wide belt hydraulic folding re-circulating conveyor able to slow for stockpilling oversize material
  • 1400mm (55″) wide belt fines conveyor
Options:
  • Belt Weigher
  • Lighting mast
  • Twin pole heavy duty overband magnet
  • Radio remote system
  • Undercrusher vibratory feeder c/w shortened main conveyor

NEW & USED INVENTORY

2019 Terex Finlay 684
2019 Terex Finlay 684
View Listing
2018 Terex Finlay 683
2018 Terex Finlay 683
View Listing
2020 Terex Finlay TC-80
2020 Terex Finlay TC-80
View Listing